top of page
Vape Kits
Drag Baby Trio from VOOPOO
The VOOPOO DRAG BABY Trio 25W Starter Kit is a pocket-friendly box mod system, integrating an 1500mAh rechargeable battery and tank, utilization of the PnP coil family from VOOPOO, and features the advanced GENE.TRIO Chipset housed within the visually striking chassis construction. Formed from durable zinc-stainless steel alloy construction, the Drag Baby Trio is incredibly lightweight to increase portability and maintains a whopping 1500mAh rechargeable battery within. The large capacity battery allows for all day vaping providing there is eLiquid in the 1.8mL capacity tank that is integrated into the Drag Baby Trio. Featuring the PnP-M2 and PnP-C1 coils firing at 0.6 and 1.2ohm, respectively, the Drag Baby Trio has a slew of new coils to call upon to create the densely flavored clouds of vapor. At the top of the tank sits a threaded top fill system, hiding two needle nose fill ports to prevent positive pressure during refills. Featuring a single button operation, the Drag Baby Trio is controlled by the advanced GENE.TRIO Chipset, offering a rapid firing speed and intelligent cold boot mode.
Please Note: The necklace chain is not included in the final production.
Quick Links:
VOOPOO PnP Replacement Coils
VOOPOO Drag BABY Trio Starter Kit Features:
GENE.TRIO Chipset
All-In-One
Dimensions - 58.5mm by 35mm by 21.5mm
Integrated 1500mAh Rechargeable Battery
Wattage Output Range: 5-25W
Resistance Range: 0.5-3.0ohm
Aluminium and Stainless Steel Construction
Intuitive Firing Button
Tri-Color LED Battery Life Indicator Light
Lanyard Attachment Point
18.5mm Diameter
1.8mL Tank Capacity
Pyrex Glass Reinforcement
Superior Stainless Steel Construction
Threaded Top Fill System - Dual Fill Ports
0.6ohm PnP-M2 Coil
1.2ohm PnP-C1 Coil
Middle to Coil Airflow Control System
Plug 'n' Play Coil Installation
Switch Timeout Protection
Short-Circuit Protection
Over Discharge Protection
Overcharge Protection
Output Over-Current Protection
MicroUSB Port
Available in Ceylon Yellow, Teal Blue, Fiesta, Aurora, Ultra Violet, Ink, Rhodonite
Includes:
1 DRAG BABY Kit
1 1.2ohm PnP-C1 Coil
1 0.6ohm PnP-M2 Coil
1 1.8mL Glass Tube
1 MicroUSB Cable
1 GENE.CHIP Card
1 Warranty Card
1 User Manual
Please Note: The necklace chain is not included in the final production.
Quick Links:
VOOPOO PnP Replacement Coils
VOOPOO Drag BABY Trio Starter Kit Features:
GENE.TRIO Chipset
All-In-One
Dimensions - 58.5mm by 35mm by 21.5mm
Integrated 1500mAh Rechargeable Battery
Wattage Output Range: 5-25W
Resistance Range: 0.5-3.0ohm
Aluminium and Stainless Steel Construction
Intuitive Firing Button
Tri-Color LED Battery Life Indicator Light
Lanyard Attachment Point
18.5mm Diameter
1.8mL Tank Capacity
Pyrex Glass Reinforcement
Superior Stainless Steel Construction
Threaded Top Fill System - Dual Fill Ports
0.6ohm PnP-M2 Coil
1.2ohm PnP-C1 Coil
Middle to Coil Airflow Control System
Plug 'n' Play Coil Installation
Switch Timeout Protection
Short-Circuit Protection
Over Discharge Protection
Overcharge Protection
Output Over-Current Protection
MicroUSB Port
Available in Ceylon Yellow, Teal Blue, Fiesta, Aurora, Ultra Violet, Ink, Rhodonite
Includes:
1 DRAG BABY Kit
1 1.2ohm PnP-C1 Coil
1 0.6ohm PnP-M2 Coil
1 1.8mL Glass Tube
1 MicroUSB Cable
1 GENE.CHIP Card
1 Warranty Card
1 User Manual
Geekvape L200 (Aegis Legend 2) Kit 200W
Geekvape L200 (Aegis Legend 2) Kit 200W with Z (Zeus) Sub ohm Tank 2021 5.5ml is more smaller and lighter, Aegis Legend V2 leaps with pride and honor. Aegis Tri-proof Technology upgrades to the second generation. A-Lock, a new way to protect from accident. Aegis Legend 2 mod with the 2nd generation of Aegis Design with new 1.08-inch full screen. Charging port with flipping cover, easier to fuel your vape. Geekvape Z (Zeus) Sub-ohm Tank 2021, the best leakproof tank so far.
Parameters
Battery: dual 18650 batteries (not included)
Output: 5-200W
Output Voltage: Max 12V
Output Current: Max 45A
Resistance range: 0.1-3Ω
Screen: 1.08 inch TFT color display
Charging Port: Type-C Port
Low voltage warning: 3.2V±0.1V
PCBA Temperature alarm: 80℃
Longest vaping time: 10s
Stand-by current: < 10uA
Operating temperature: 0℃- 45℃
Storage temperature: - 20℃-60℃
Relative humidity: 45%RH-75%RH
Features
Geekvape L200 -aegis legend 2 features
-Smaller & lighter
-Accidental press protection
-1.08-inch TFT color screen
-Powered by dual 18650 batteries, max 200W output
-New tri-proof: IP68 Rating Waterproof, Shockproof and Dustproof
-Larger air slots
-Top airflow system
-Adjustable airflow
-Leakproof design
-Geekvape Z series coil
-Cooling mode: natural cooling
-A-Lock protects you from over-burnt coil or overheating by accidental press
-Type C charging port with flipping cover, easier to fuel your vape
-Wide Working Temperature Range
-Geekvape Zeus Sub-ohm 2021 Tank, larger air inflow & better performance
Packages
1x Aegis Legend 2 mod
1x Z Sub ohm Tank 2021 (5.5ml)
2x Geekvape Z Series coil(Pre-installed: 0.2Ω 70-80W; Spare: 0.25Ω 45-57W)
1x Coil Tool
1x USB Type-C
1x Spare glass tube(5.5ml)
1x Spare parts
Parameters
Battery: dual 18650 batteries (not included)
Output: 5-200W
Output Voltage: Max 12V
Output Current: Max 45A
Resistance range: 0.1-3Ω
Screen: 1.08 inch TFT color display
Charging Port: Type-C Port
Low voltage warning: 3.2V±0.1V
PCBA Temperature alarm: 80℃
Longest vaping time: 10s
Stand-by current: < 10uA
Operating temperature: 0℃- 45℃
Storage temperature: - 20℃-60℃
Relative humidity: 45%RH-75%RH
Features
Geekvape L200 -aegis legend 2 features
-Smaller & lighter
-Accidental press protection
-1.08-inch TFT color screen
-Powered by dual 18650 batteries, max 200W output
-New tri-proof: IP68 Rating Waterproof, Shockproof and Dustproof
-Larger air slots
-Top airflow system
-Adjustable airflow
-Leakproof design
-Geekvape Z series coil
-Cooling mode: natural cooling
-A-Lock protects you from over-burnt coil or overheating by accidental press
-Type C charging port with flipping cover, easier to fuel your vape
-Wide Working Temperature Range
-Geekvape Zeus Sub-ohm 2021 Tank, larger air inflow & better performance
Packages
1x Aegis Legend 2 mod
1x Z Sub ohm Tank 2021 (5.5ml)
2x Geekvape Z Series coil(Pre-installed: 0.2Ω 70-80W; Spare: 0.25Ω 45-57W)
1x Coil Tool
1x USB Type-C
1x Spare glass tube(5.5ml)
1x Spare parts
Pod Kis
Smok Solus Pod Kit
The SMOK SOLUS 16W Pod Kit, featuring a draw-activated firing mechanism, internal 700mAh battery, and can hold up to 3mL of eJuice within the pod. Constructed from durable zinc-alloy, the chassis is slim and portable, and can withstand light falls and drops. Equipped with a draw-activated firing mechanism, the SOLUS is free of any buttons and is incredibly easy to use. Refilling the 0.9ohm Meshed Coil Pods from the bottom, the SOLUS Pod can hold up to 3mL of your favorite eJuice or nicotine salt. In addition, the internal 700mAh battery is rechargeable via bottom microUSB port, making this a perfect vape for those that are on the go or traveling.
SMOK SOLUS 16W Pod Kit Features:
Dimensions - 100mm by 21.5mm by 13mm
Integrated 700mAh Rechargeable Battery
Wattage Output Range: 4-16W
Voltage Output Range: 3.0-3.6V
Resistance Range: 0.8-3.0ohm
Zinc-Alloy Chassis Construction
Draw-Activated Firing Mechanism
LED Battery Life Indicator Light
3mL Pod Capacity
Bottom Fill System - Silicone Stoppered
Integrated 0.9ohm Mesh Coil
Magnetic Pod Connection
Bottom USB Charging Port
Available in Black, Grey, Silver, Blue Purple, Cyan Pink, Gold Red
Includes:
1 SOLUS Device
1 0.9ohm Cato Pod
1 User Manual
SMOK SOLUS 16W Pod Kit Features:
Dimensions - 100mm by 21.5mm by 13mm
Integrated 700mAh Rechargeable Battery
Wattage Output Range: 4-16W
Voltage Output Range: 3.0-3.6V
Resistance Range: 0.8-3.0ohm
Zinc-Alloy Chassis Construction
Draw-Activated Firing Mechanism
LED Battery Life Indicator Light
3mL Pod Capacity
Bottom Fill System - Silicone Stoppered
Integrated 0.9ohm Mesh Coil
Magnetic Pod Connection
Bottom USB Charging Port
Available in Black, Grey, Silver, Blue Purple, Cyan Pink, Gold Red
Includes:
1 SOLUS Device
1 0.9ohm Cato Pod
1 User Manual
Vaporesso Sky Solo Plus
Vaporesso has spent considerable time and resources building a reputation on using advanced, cutting-edge technologies to deliver quick, reliable, and powerful vapes that appeal to a wide section of vapers. To further expand that range, Vaporesso has introduced the Sky SOLO Plus Vape Pen Starter Kit to engage with those new to vaping, or experienced vapers who are looking for an uncomplicated and simple backup system. Pared down to only the most crucial elements, the base of the included “tank” is incredibly built in to the top of the mod - this eliminates an additional piece and decreases the overall complexity of the system! The Sky SOLO Plus includes an integrated 3000 mAh rechargeable battery cell and is capable of accepting up to 8 ml of your tastiest e-liquid! Interested in experiencing simplicity and performance the Vaporesso way? Add this awesome Sky SOLO Plus Vape Pen Starter Kit to your DirectVapor shopping cart today!
What’s Included
1 x Vaporesso SKY SOLO Plus Vape Pen Starter Kit
2 x 0.18 ohm GT Meshed Coil
1 x USB Cable
1 x Spare Parts
1 x User Manual
Specs & Features
Omni Board Mini Chipset
Threaded Top Fill System
8ml Maximum Capacity
Dual Airflow Slot
Single Button Control Interface
Integrated 3000 mAh Lithium Battery
Up to 1A Charging
Battery LED Light Indicator
Zinc Alloy and Stainless Steel
WARNING: This is an advanced Item. Please use at your own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. We are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.
What’s Included
1 x Vaporesso SKY SOLO Plus Vape Pen Starter Kit
2 x 0.18 ohm GT Meshed Coil
1 x USB Cable
1 x Spare Parts
1 x User Manual
Specs & Features
Omni Board Mini Chipset
Threaded Top Fill System
8ml Maximum Capacity
Dual Airflow Slot
Single Button Control Interface
Integrated 3000 mAh Lithium Battery
Up to 1A Charging
Battery LED Light Indicator
Zinc Alloy and Stainless Steel
WARNING: This is an advanced Item. Please use at your own risk and always use proper precautions and handling as these are very sensitive to charging characteristics and may explode or burn if not properly handled. Please note that there is an inherent risk with the use of any and all rechargeable batteries in any circumstance. We are not responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers. Images are for illustration purposes only. Actual color, finish and packaging may vary.
Standalone Mods
VFENG 230W TC Mod from SnowWolf
An updated rendition to the original VFENG mod, the SnowWolf VFENG-S 230W TC Box Mod integrates an updated chassis constructed with Zinc Alloy and durable plastic elements to create a lighter shell while maintaining the high-performance features. The epicenter of VFENG-S lies within the 1.3 Inch OLED Screen, providing intuitive user-friendly UI with intuitive display along with multiple arrangement for a dynamic display experience. The LED light-up feature located on the back of the device within the SNOWWOLF logo cutout is fully customizable, offering a spectrum of vibrant colors. Powered by the SnowWolf series latest chipset, the VFENG-S is capable of 10 to 230W of output, multitudes of settings, and comprehensive temperature control suite. Under temperature control setting, it has Temperature Coefficient of Resistance (TCR) adjustment, a proprietary technology to adjust resistance of a wide range of heating elements to different ranges. Driving the entire system are two high-amperage 18650 batteries (sold separately), accessed via hinged battery door cover.
SnowWolf VFENG-S 230W Box Mod Features:
Dual 18650 High-Amp Battery - Not Included
Wattage Ouput Range: 10-230W
Voltage Output Range: 1-7.5V
Minimum Atomizer Resistance: 0.05ohm
Ni200, Titanium, and Stainless Steel Compatibility
Temperature Coefficient of Resistance (TCR) Adjustments
High Quality Zinc Alloy and Plastic Construction
Full-Color 1.3 Inch OLED Display
Intuitive User-Friendly Interface
Colorful LED Logo Cutout - Fully Customizable
Power Up Functionality
Hexagon Firing Button
Two Adjustment Buttons
Hinged Battery Door Cover
510 Connection
SnowWolf VFeng Tank 3 Features:
23mm Diameter
2.8mL Juice Reservoir
Superior 303 Stainless Steel Construction
High-Resistance Pyrex Glass Reinforcement
0.2ohm VFeng VS2-H Coil Head - rated for 60-100W
Enormous Dual Airslot at Base
Convenient Threaded Top-Fill Design
Delrin Widebore Drip Tip
510 Connection
Includes:
1 SnowWolf VFENG-S 230W Mod
1 MicroUSB Cable
Instructional Manual
SnowWolf VFENG-S 230W Box Mod Features:
Dual 18650 High-Amp Battery - Not Included
Wattage Ouput Range: 10-230W
Voltage Output Range: 1-7.5V
Minimum Atomizer Resistance: 0.05ohm
Ni200, Titanium, and Stainless Steel Compatibility
Temperature Coefficient of Resistance (TCR) Adjustments
High Quality Zinc Alloy and Plastic Construction
Full-Color 1.3 Inch OLED Display
Intuitive User-Friendly Interface
Colorful LED Logo Cutout - Fully Customizable
Power Up Functionality
Hexagon Firing Button
Two Adjustment Buttons
Hinged Battery Door Cover
510 Connection
SnowWolf VFeng Tank 3 Features:
23mm Diameter
2.8mL Juice Reservoir
Superior 303 Stainless Steel Construction
High-Resistance Pyrex Glass Reinforcement
0.2ohm VFeng VS2-H Coil Head - rated for 60-100W
Enormous Dual Airslot at Base
Convenient Threaded Top-Fill Design
Delrin Widebore Drip Tip
510 Connection
Includes:
1 SnowWolf VFENG-S 230W Mod
1 MicroUSB Cable
Instructional Manual
Top 1 230W Box Mod from Sigelei
Inspired by a futuristic speedometer design, the Sigelei TOP 1 230W TC Box Mod delivers a truly unique chassis highlighted by the large 1.3" Full-Color OLED circular display and a robust 800 microsecond instant output chipset. The Sigelei TOP 1 is brilliant constructed with a modern metal textured design with carbon fiber inlay at the grip section. The crowning achievement lies within the impressive speedometer-inspired OLED display, featuring a full-color vibrant screen for a dynamic operational experience. Powered by dual 18650 batteries (sold separately), the internal chipset the TOP 1 can fire up to 200W along with full temperature control and onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements.
Sigelei TOP 1 230W TC Box Mod Features:
Dimensions - 89mm by 55.8mm by 32mm
Dual High-Amp 18650 Battery - Not Included
Wattage Output Range: 10-230W
Voltage Output Range: 6.4-8.4V
Minimum Atomizer Resistance: 0.1ohm
Temperature Range: 200-600F
Versatile Temperature Control Module
Supports Ni200 Nickel, Titanium, and 304/316/317 Stainless Steel
TCR Adjustments
Durable Zinc Alloy Frame Construction
Modern Metal Textured Design
Carbon Fiber Inlay
Intuitive 1.3" Full-Color OLED Display
Three Button Operations
Bottom-Loaded Hinged Battery Door
Onboard Reverse Polarity Protection
MicroUSB Port
510 Connection
Includes:
1 Sigelei TOP 1 Box Mod
1 MicroUSB Cable
1 Warranty Card
Instructional Manual
Sigelei TOP 1 230W TC Box Mod Features:
Dimensions - 89mm by 55.8mm by 32mm
Dual High-Amp 18650 Battery - Not Included
Wattage Output Range: 10-230W
Voltage Output Range: 6.4-8.4V
Minimum Atomizer Resistance: 0.1ohm
Temperature Range: 200-600F
Versatile Temperature Control Module
Supports Ni200 Nickel, Titanium, and 304/316/317 Stainless Steel
TCR Adjustments
Durable Zinc Alloy Frame Construction
Modern Metal Textured Design
Carbon Fiber Inlay
Intuitive 1.3" Full-Color OLED Display
Three Button Operations
Bottom-Loaded Hinged Battery Door
Onboard Reverse Polarity Protection
MicroUSB Port
510 Connection
Includes:
1 Sigelei TOP 1 Box Mod
1 MicroUSB Cable
1 Warranty Card
Instructional Manual
Tanks
Horizon Tech SAKERZ Sub-Ohm Tank
Horizon SAKERZ Sub-Ohm Tank Features:
29.5mm Diameter
5mL Bubble Glass Capacity
3.5mL Straight Glass Capacity
Pyrex Glass Reinforcement
Threaded Top Fill System - Dual Fill Port
Superior 304 Stainless Steel Tank Construction
Horizon SAKERZ Coil Series
0.17ohm 2-in-1 Mesh Coil - rated for 70W
0.16ohm Mesh Coil - rated for 70W
Press-Fit Coil Installation
Dual Slotted Top Airflow Control Ring
Widebore 810 Drip Tip
Threaded 510 Connection
Available in Carbon Black, SS, Gunmetal, Purplish Red, Blue, Rainbow
Includes:
1 SAKERZ Tank
1 0.16ohm Mesh Coil
1 0.17ohm 2-in-1 Mesh Coil
1 Tool Kit
1 3.5mL Replacement Glass
1 User Manual
1 Promotion Card
1 Warranty Card
29.5mm Diameter
5mL Bubble Glass Capacity
3.5mL Straight Glass Capacity
Pyrex Glass Reinforcement
Threaded Top Fill System - Dual Fill Port
Superior 304 Stainless Steel Tank Construction
Horizon SAKERZ Coil Series
0.17ohm 2-in-1 Mesh Coil - rated for 70W
0.16ohm Mesh Coil - rated for 70W
Press-Fit Coil Installation
Dual Slotted Top Airflow Control Ring
Widebore 810 Drip Tip
Threaded 510 Connection
Available in Carbon Black, SS, Gunmetal, Purplish Red, Blue, Rainbow
Includes:
1 SAKERZ Tank
1 0.16ohm Mesh Coil
1 0.17ohm 2-in-1 Mesh Coil
1 Tool Kit
1 3.5mL Replacement Glass
1 User Manual
1 Promotion Card
1 Warranty Card
Horizon Tech SAKERZ Sub-Ohm Tank
Horizon SAKERZ Sub-Ohm Tank Features:
29.5mm Diameter
5mL Bubble Glass Capacity
3.5mL Straight Glass Capacity
Pyrex Glass Reinforcement
Threaded Top Fill System - Dual Fill Port
Superior 304 Stainless Steel Tank Construction
Horizon SAKERZ Coil Series
0.17ohm 2-in-1 Mesh Coil - rated for 70W
0.16ohm Mesh Coil - rated for 70W
Press-Fit Coil Installation
Dual Slotted Top Airflow Control Ring
Widebore 810 Drip Tip
Threaded 510 Connection
Available in Carbon Black, SS, Gunmetal, Purplish Red, Blue, Rainbow
Includes:
1 SAKERZ Tank
1 0.16ohm Mesh Coil
1 0.17ohm 2-in-1 Mesh Coil
1 Tool Kit
1 3.5mL Replacement Glass
1 User Manual
1 Promotion Card
1 Warranty Card
29.5mm Diameter
5mL Bubble Glass Capacity
3.5mL Straight Glass Capacity
Pyrex Glass Reinforcement
Threaded Top Fill System - Dual Fill Port
Superior 304 Stainless Steel Tank Construction
Horizon SAKERZ Coil Series
0.17ohm 2-in-1 Mesh Coil - rated for 70W
0.16ohm Mesh Coil - rated for 70W
Press-Fit Coil Installation
Dual Slotted Top Airflow Control Ring
Widebore 810 Drip Tip
Threaded 510 Connection
Available in Carbon Black, SS, Gunmetal, Purplish Red, Blue, Rainbow
Includes:
1 SAKERZ Tank
1 0.16ohm Mesh Coil
1 0.17ohm 2-in-1 Mesh Coil
1 Tool Kit
1 3.5mL Replacement Glass
1 User Manual
1 Promotion Card
1 Warranty Card
More Smoking Devices
510 device-torches-bangerS-shells
ZTCSMOKE Edge Kit
Edge Box Mod by ZTC Smoke
Edge has a moderate body size with strong, smooth lines. Its arc chamfer design makes it easy to fit the palm and to achieve a comfortable feel.
Parameters:
Size: 64mm x 38mm x 17.5mm
Weight: 80g
Output Voltage: 3.2V / 3.5V / 3.8V / 4.0V
Battery: 400mAh
Resistance: 1.0-3.0Ω
Interface: 510
Since the Edge Box is so small in size, it has delicate texture with an applied metal paint process. It truly is a beautiful device.
The Edge Box atomizer interface can meet the product performance and make the operation more simple by using the magnetic absorption and a close-fit design.
LED Voltage and Power Indicator Modes:
Green Light - 4.0V - 75% - 100%
Blue Light - 3.8V - 50% - 75%
Yellow Light - 3.5V - 25% - 50%
Red Light - 3.2V - 0% - 25%
With a 400mAh built-in battery capacity and the latest energy saving technology, the Edge Box has stable performance and allows the user to enjoy every moment.
Automatic protections under abnormal state include: short circuit protection, overcharge protection, open circuit protection, smoking limit protection, low voltage protection, and low resistance protection.
Box Contents:
1 x Edge Box Mod
1 x Magnetic Adapter
1 x USB Cable
1 x User Manual
Edge has a moderate body size with strong, smooth lines. Its arc chamfer design makes it easy to fit the palm and to achieve a comfortable feel.
Parameters:
Size: 64mm x 38mm x 17.5mm
Weight: 80g
Output Voltage: 3.2V / 3.5V / 3.8V / 4.0V
Battery: 400mAh
Resistance: 1.0-3.0Ω
Interface: 510
Since the Edge Box is so small in size, it has delicate texture with an applied metal paint process. It truly is a beautiful device.
The Edge Box atomizer interface can meet the product performance and make the operation more simple by using the magnetic absorption and a close-fit design.
LED Voltage and Power Indicator Modes:
Green Light - 4.0V - 75% - 100%
Blue Light - 3.8V - 50% - 75%
Yellow Light - 3.5V - 25% - 50%
Red Light - 3.2V - 0% - 25%
With a 400mAh built-in battery capacity and the latest energy saving technology, the Edge Box has stable performance and allows the user to enjoy every moment.
Automatic protections under abnormal state include: short circuit protection, overcharge protection, open circuit protection, smoking limit protection, low voltage protection, and low resistance protection.
Box Contents:
1 x Edge Box Mod
1 x Magnetic Adapter
1 x USB Cable
1 x User Manual
XTube 710 from Vapmod
The Vapmod X Tube 710 Vaporizer is an all-in-one designed compact vape pen system, featuring an integrated 900mAh rechargeable battery, 4 voltage based power levels, and is equipped with an impressive preheating function to create a smooth but efficient vape system that will take the market segment by storm. Engineered from zinc-alloy, the chassis of the X Tube 710 Vaporizer is visually striking, housing the 900mAh rechargeable battery within. Powered by the integrated battery, the X Tube relies on a voltage based output featuring 4 voltage power levels to accurately find the best vape settings to vaporizer the contents of any cartridge. In addition, the X Tube is equipped with an optional heating chamber, encapsulating and recycling the generated heat output from the threaded 510 connection. This allows for better and efficient vaporization from the attached cartridge, producing more pleasurable vapor and extracting the best flavor from today's most popular eJuice.
Vapmod X Tube 710 Vaporizer - Express Kit Features:
All-In-One Design
Dimensions - 88mm by 19mm Diameter
Integrated 900mAh Rechargeable Battery
Voltage Output Range: 2.5-4.0V
4 Power Levels - 2.5V, 3.0V, 3.5V, 4.0V
Resistance Range: 0.8-3.0ohm
90s Preheating Function
Zinc-Alloy Chassis Construction
Optional Heating House
Single Button Operation
LED Battery Life Indicator Light
Short-Circuit Protection
Overheat Protection
Overcharge Protection
MicroUSB Port
510 Threaded Connection
Available in White, Red, Silver, Black, Blue
Includes:
1 Vapmod XTube 710
1 Preheating Chamber
1 Decorative Ring
1 MicroUSB Charger
1 User Manual
Vapmod X Tube 710 Vaporizer - Express Kit Features:
All-In-One Design
Dimensions - 88mm by 19mm Diameter
Integrated 900mAh Rechargeable Battery
Voltage Output Range: 2.5-4.0V
4 Power Levels - 2.5V, 3.0V, 3.5V, 4.0V
Resistance Range: 0.8-3.0ohm
90s Preheating Function
Zinc-Alloy Chassis Construction
Optional Heating House
Single Button Operation
LED Battery Life Indicator Light
Short-Circuit Protection
Overheat Protection
Overcharge Protection
MicroUSB Port
510 Threaded Connection
Available in White, Red, Silver, Black, Blue
Includes:
1 Vapmod XTube 710
1 Preheating Chamber
1 Decorative Ring
1 MicroUSB Charger
1 User Manual
bottom of page